Beneficial Use/Capacity

From this page, you can fill the Beneficial Use/Capacity details.

1. To Fill Beneficial Use/Capacity Details:

• Enter the Area of the HWL of the reservoir.

• Enter capacity of this enlargement.

NOTE: To be filled only when enlargement is selected in general Info.

• Select Beneficial Use from the drop-down list in the grid.

• Select Sub-use.

• Enter Active Capacity The reservoir capacity normally usable for storage and regulation of reservoir inflows to meet established reservoir operating requirements. It is the total capacity less the sum of the inactive and dead capacities..

• Enter Inactive Capacity.

2. To Add Another Row in Beneficial Use Grid:

• Click Add Row.

• System pops-up a message, "Do you want to add a new row?"

• Click Ok.

• System displays a new row with fields ready to enter.

• Follow the same procedure as mentioned above to enter the details.

    3. To Delete Row in Beneficial Use Grid:

1. • Select the Row you want to delete.

   • Click Delete Row.

   • System pops-up a message, "Are you sure you want to delete this record?"

   • Click Ok.

   • System will remove the selected row.

Top